The automatic hammers of the series Imad 909 are entirely realized by TQM Itaca Technology srl..

The microphone is integrated in order to simplify the operations of retooling for type change. The impact force and important parameters are totally settable from the software Itasonic2010^©.    

The automatic hammer ensures the maximum repeatability of the impact, fundamental for a correct analysis of the sonic spectrum.

iDaq4Sonic is the interface which allows to connect the sensors required for the functioning of Itasonic^©2010 and of Itanoise^©. iDaq4Sonic is provided with 4 inputs for IEPE sensors (microphones, accelerometers, load cells...) and 1 Strain Gage input. iDaq4Sonic includes a module 8 In/8 Out (expandable) and an hammer module, for the management of the automatic hammers Imad 908 and Imad 909. The connection to the Pc is made by Ethernet 10/100.

On the back side there are 4 DB25 inputs for the I/O connections, 2 DB9 inputs for hammer and encoder, 1 connector for the power input cable (supplied by the iPower4Sonic module), and the 10/100 Mbit Ethernet connector.

iDaq4Sonic is powered by iPower4Sonic module.    Power Supply 110/230 Vac 50/60 Hz

                                          iDaq4Sonic Data Sheet

iDaq4Geo is the new interface entirely developed by TQM Itaca Technology srl in order to manage the dialogue with everything which can be connected to a control station, like probes, laser heads, encoder, operator keypads, pedal for start/stop measure, sensors, input devices, etc…

The system is optimized to manage dynamic controls with the acquisition at the same time of the angular position by encoder and of the dimensional values by measuring sensors (contact sensors or not-contact sensors).

The I/O modules guarantee the dialogue with the automatic systems of load and unload, making iDaq4Geo suitable for the management of the 100% control directly in a production line.

iDaq4Geo has a modular structure and it can integrate the following devices:

•    Power supply module, with output 24 Volt
•    Module LAN 10/100
•    CPU with encoder board synchronized with A/D
•    I/O board, up to max 16 In and 16 Out
•    Input for pedal of start/stop measure
•    16 bit Analog/Digital Converter
•    Signal amplifier for the connection of HBT probes (max. 40 probes)

The connection with the PC is made by Ethernet 10/100, the fastest and safest system available nowadays, which solves all the problems of distance between the PC and the gauge.
iDaq4Geo is the standard interface for the Itageo 6^© stations and for the Itastat 6 Measure stations with high performance.
There are also available examples of codes in C and C#: on demand it’s possible to develop drivers for any measuring software available nowadays.

 iDaq4Geo Data Sheet